problemi con i video su youtube

Home Page Forum utenti problemi con i video su youtube

Tag: ,

Visualizzazione 33 filoni di risposte
  • Autore
    Articoli
    • #21771
      gianka
      Partecipante

      Ciao,

      dopo aver fatto due aggiornamenti della scheda video quando vedo i video su youtube sia con il kernel 3.4 e con il 3.10 a schermo intero la riproduzione si blocca e ci sono delle righe che vanno dal alto verso il basso in continuo movimento.Ti invio il report di sistema.

      Un felice 2014 a tutti.

      gianka

    • #28283
      Silvan
      Amministratore del forum

      Ciao e buon anno,

      potresti copiare qui l’output dei seguenti comandi dati da un terminale:

      sudo dkms status

      e:

      sudo modprobe radeon; dmesg | tail -n 50

      ? Grazie.

    • #28284
      gianka
      Partecipante

      ciao,

      grazie. Dando il comando sudo dkms status mi da questo errore Could not locate dkms.conf file.

      File: does not exist.

      dando il comando modprobe radeon; dmesg | tail -n 50 mi da questo:

      31.960933] [<c1043ef3>] ? get_parent_ip+0xb/0x31

      [ 31.960975] [<f9a7b064>] firegl_open+0x344/0x380 [fglrx]

      [ 31.961017] [<f9a6bbf4>] ip_firegl_open+0x1a/0x1c [fglrx]

      [ 31.961059] [<f9a6b5e3>] firegl_stub_open+0x96/0xda [fglrx]

      [ 31.961067] [<c10c2859>] chrdev_open+0xff/0x11d

      [ 31.961073] [<c10bde44>] __dentry_open+0x16b/0x25b

      [ 31.961079] [<c10c275a>] ? cdev_put+0x1a/0x1a

      [ 31.961085] [<c10be2c9>] vfs_open+0x26/0x2b

      [ 31.961091] [<c10bedf4>] nameidata_to_filp+0x25/0x2a

      [ 31.961097] [<c10c9a00>] do_last+0x56d/0x6d0

      [ 31.961103] [<c10ca232>] path_openat+0xa6/0x2cb

      [ 31.961110] [<c10ca51c>] do_filp_open+0x26/0x67

      [ 31.961116] [<c1044029>] ? sub_preempt_count+0x7c/0x89

      [ 31.961122] [<c13753da>] ? _raw_spin_unlock+0x10/0x25

      [ 31.961128] [<c10d2e1c>] ? alloc_fd+0xb6/0xc1

      [ 31.961134] [<c10c6a28>] ? getname_flags+0x69/0xe3

      [ 31.961140] [<c10beefe>] do_sys_open+0x105/0x188

      [ 31.961147] [<c10bef9f>] sys_open+0x1e/0x22

      [ 31.961152] [<c1375840>] syscall_call+0x7/0xb

      [ 31.961519] [fglrx] Firegl kernel thread PID: 2771

      [ 31.961599] [fglrx] Firegl kernel thread PID: 2772

      [ 31.961681] [fglrx] Firegl kernel thread PID: 2773

      [ 31.961773] [fglrx] IRQ 43 Enabled

      [ 31.982308] [fglrx] Reserved FB block: Shared offset:0, size:1000000

      [ 31.982310] [fglrx] Reserved FB block: Unshared offset:f95b000, size:3000

      [ 31.982312] [fglrx] Reserved FB block: Unshared offset:f95e000, size:3a2000

      [ 31.982314] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000

      [ 34.149838] fuse init (API version 7.18)

      [ 34.231901] vboxdrv: Found 6 processor cores.

      [ 34.232073] vboxdrv: fAsync=0 offMin=0x888 offMax=0x27a4

      [ 34.232169] vboxdrv: TSC mode is ‘synchronous’, kernel timer mode is ‘normal’.

      [ 34.232171] vboxdrv: Successfully loaded version 4.2.0_openmamba (interface 0x001a0004).

      [ 34.513753] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 34.516642] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 34.521503] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 36.776182] Bluetooth: Core ver 2.16

      [ 36.776210] NET: Registered protocol family 31

      [ 36.776215] Bluetooth: HCI device and connection manager initialized

      [ 36.776221] Bluetooth: HCI socket layer initialized

      [ 36.776226] Bluetooth: L2CAP socket layer initialized

      [ 36.776236] Bluetooth: SCO socket layer initialized

      [ 36.785286] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 36.785292] Bluetooth: BNEP filters: protocol multicast

      [ 36.823721] eth0: setting full-duplex.

      [ 45.563971] pci 0000:00:14.4: wake-up capability enabled by ACPI

      [ 45.580283] ata1.00: configured for UDMA/133

      [ 45.580286] ata1: EH complete

      [ 47.462840] EXT4-fs (sda1): re-mounted. Opts: commit=0

      [ 47.467530] EXT4-fs (sda3): re-mounted. Opts: commit=0

      [ 47.665021] eth0: no IPv6 routers present

    • #28285

      ciao, dato che anch’io ho problemi con youtube e i video in generale mi inserisco nella discussione… se posso…

      dopo il primo comando mi da: sudo: dkms: command not found

      !!!!

      mentre l’output dell’altro è:

      sudo modprobe radeon; dmesg | tail -n 50

      Password:

      [ 25.408091] X:2095 freeing invalid memtype d01d2000-d01e2000

      [ 25.408113] X:2095 freeing invalid memtype d01e2000-d01f2000

      [ 25.408134] X:2095 freeing invalid memtype d01f2000-d0202000

      [ 25.408156] X:2095 freeing invalid memtype d0202000-d0212000

      [ 25.408178] X:2095 freeing invalid memtype d0212000-d0222000

      [ 25.408200] X:2095 freeing invalid memtype d0222000-d0232000

      [ 25.408222] X:2095 freeing invalid memtype d0232000-d0242000

      [ 25.408243] X:2095 freeing invalid memtype d0242000-d0252000

      [ 25.408265] X:2095 freeing invalid memtype d0252000-d0262000

      [ 25.408287] X:2095 freeing invalid memtype d0262000-d0272000

      [ 25.408309] X:2095 freeing invalid memtype d0272000-d0282000

      [ 25.408330] X:2095 freeing invalid memtype d0282000-d0292000

      [ 25.408352] X:2095 freeing invalid memtype d0292000-d02a2000

      [ 25.408374] X:2095 freeing invalid memtype d02a2000-d02b2000

      [ 25.408396] X:2095 freeing invalid memtype d02b2000-d02c2000

      [ 25.408418] X:2095 freeing invalid memtype d02c2000-d02d2000

      [ 25.408439] X:2095 freeing invalid memtype d02d2000-d02e2000

      [ 25.408461] X:2095 freeing invalid memtype d02e2000-d02f2000

      [ 25.408483] X:2095 freeing invalid memtype d02f2000-d0302000

      [ 25.412950] mtrr: MTRR 3 not used

      [ 27.056165] Adding 5156860k swap on /dev/sda2. Priority:1 extents:1 across:5156860k

      [ 29.072295] wmi: Mapper loaded

      [ 42.083104] agpgart-via 0000:00:00.0: AGP 3.5 bridge

      [ 42.083136] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode

      [ 42.083209] pci 0000:01:00.0: putting AGP V3 device into 8x mode

      [ 42.306986] [drm] Setting GART location based on new memory map

      [ 42.311073] [drm] Loading R200 Microcode

      [ 42.346405] [drm] writeback test succeeded in 1 usecs

      [ 47.318074] fuse init (API version 7.18)

      [ 47.410085] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 47.517059] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 47.727090] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 50.327254] r8169 0000:00:09.0: eth0: link down

      [ 50.331730] r8169 0000:00:09.0: eth0: link down

      [ 50.332604] ADDRCONF(NETDEV_UP): eth0: link is not ready

      [ 50.451086] Bluetooth: Core ver 2.16

      [ 50.451169] NET: Registered protocol family 31

      [ 50.451173] Bluetooth: HCI device and connection manager initialized

      [ 50.451179] Bluetooth: HCI socket layer initialized

      [ 50.451183] Bluetooth: L2CAP socket layer initialized

      [ 50.451193] Bluetooth: SCO socket layer initialized

      [ 50.480900] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 50.480907] Bluetooth: BNEP filters: protocol multicast

      [ 51.040536] r8712u: 1 RCR=0x153f00e

      [ 51.041669] r8712u: 2 RCR=0x553f00e

      [ 51.148686] ADDRCONF(NETDEV_UP): wlan0: link is not ready

      [ 51.174842] ADDRCONF(NETDEV_UP): eth1: link is not ready

      [ 72.502433] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

      [ 73.269854] r8712u: [r8712_got_addbareq_event_callback] mac = 34:08:04:32:c8:b8, seq = 16, tid = 0

      [ 83.986028] wlan0: no IPv6 routers present

    • #28286
      gianka
      Partecipante

      aggiungo altri comandi se possono essere utili:

      whereis dkms

      dkms: /usr/src/ndiswrapper-1.58/dkms.conf /usr/src/ati-driver-13.12/dkms.conf /usr/src/nvidia-331.20/dkms.conf /usr/src/r8101-1.024.00/dkms.conf /usr/sbin/dkms /etc/dkms /usr/lib/dkms /usr/share/man/man8/dkms.8.gz

      /usr/sbin/dkms status

      Error! Could not locate dkms.conf file.

      File: does not exist.

      Ciao

      Gianka

    • #28287
      michele_d
      Partecipante

      Ciao,

      da una sessione di assistenza remota ho dato i comandi scritti qua sopra ( gli ultimi 2 )

      Ho avuto diversi problemi perché il sistema era instabile ( credo Kde) non ho potuto generare nessun report.

      1_il desktop lampeggia quando cerco di interagire sulle finestre

      2_ad esempio il tasto modifica sul post del forum mi riduce la finestra

      3_non c’è modo di spegnere la macchina se no dal tasto reset fisico.

      4_aggiungo che in un tentativo di sessione di skype l’audio assomigliava alla voce di Paperino

      attendiamo notizie

      Mik e Gianka

    • #28289
      Silvan
      Amministratore del forum

      Ciao, chi ha dato il comando sudo dkms status con esito negativo, lo installi con sudo smart install dkms e riavvii, dopodiché può ripetere i comandi richiesti nel mio post.

    • #28290
      gianka
      Partecipante

      Ciao il dkms è già installato

      sudo smart install dkms

      Caricamento cache in corso…

      Aggiornamento cache in corso.. ####################################### [100%]

      attenzione: dkms-2.2.0.3-2mamba2@i586 è già installato

      Analisi delle operazioni da compiere…

      sudo dkms status

      Error! Could not locate dkms.conf file.

      File: does not exist.

      Ciao Gianka

    • #28291

      l’output di sudo dkms status è nullo, ovvero non mi da niente

      l’output di sudo modprobe radeon; dmesg | tail -n 50 è:

      [ 12.361237] ata4.01: NODEV after polling detection

      [ 12.397628] psmouse serio1: hgpk: ID: 10 00 64

      [ 12.749837] r8712u: CustomerID = 0x0000

      [ 12.749848] r8712u: MAC Address from efuse = 5c:d9:98:a7:2a:b5

      [ 12.749854] r8712u: Loading firmware from “rtlwifi/rtl8712u.bin”

      [ 12.750706] usbcore: registered new interface driver r8712u

      [ 12.764542] ata4.00: configured for UDMA/33 (device error ignored)

      [ 12.766308] ata4: EH complete

      [ 12.934808] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

      [ 12.934817] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

      [ 12.935076] snd_via82xx 0000:00:11.5: setting latency timer to 64

      [ 13.249338] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5

      [ 43.729770] NET: Registered protocol family 10

      [ 43.744113] ata4: lost interrupt (Status 0x50)

      [ 43.744152] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen

      [ 43.744163] sr 3:0:0:0: CDB: cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00

      [ 43.744188] ata4.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in

      [ 43.744190] res 40/00:03:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout)

      [ 43.744196] ata4.00: status: { DRDY }

      [ 43.744231] ata4: soft resetting link

      [ 43.784227] NET: Registered protocol family 4

      [ 43.792182] NET: Registered protocol family 5

      [ 43.895241] ata4.01: NODEV after polling detection

      [ 44.281255] ata4.00: configured for UDMA/33 (device error ignored)

      [ 44.283096] ata4: EH complete

      [ 45.296842] EXT4-fs (sda1): re-mounted. Opts: (null)

      [ 47.912596] Adding 5156860k swap on /dev/sda2. Priority:1 extents:1 across:5156860k

      [ 49.956679] wmi: Mapper loaded

      [ 68.835628] fuse init (API version 7.18)

      [ 68.973076] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 69.063624] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 69.244293] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 72.177759] r8169 0000:00:09.0: eth0: link down

      [ 72.181034] r8169 0000:00:09.0: eth0: link down

      [ 72.181416] ADDRCONF(NETDEV_UP): eth0: link is not ready

      [ 72.420098] Bluetooth: Core ver 2.16

      [ 72.420167] NET: Registered protocol family 31

      [ 72.420171] Bluetooth: HCI device and connection manager initialized

      [ 72.420178] Bluetooth: HCI socket layer initialized

      [ 72.420182] Bluetooth: L2CAP socket layer initialized

      [ 72.420201] Bluetooth: SCO socket layer initialized

      [ 72.451097] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 72.451106] Bluetooth: BNEP filters: protocol multicast

      [ 72.884517] r8712u: 1 RCR=0x153f00e

      [ 72.885368] r8712u: 2 RCR=0x553f00e

      [ 72.995578] ADDRCONF(NETDEV_UP): wlan0: link is not ready

      [ 73.018226] ADDRCONF(NETDEV_UP): eth1: link is not ready

      [ 93.915399] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

      [ 94.619225] r8712u: [r8712_got_addbareq_event_callback] mac = 34:08:04:32:c8:b8, seq = 16, tid = 0

      [ 105.506035] wlan0: no IPv6 routers present

      …….che mi pare diverso dall’ultimo che ho postato in precedenza.

      ciaoo

    • #28292
      Silvan
      Amministratore del forum

      Chiedo scusa, a parte l’errore con dkms che non mi è chiaro, l’altro comando da dare sarebbe questo:

      sudo modprobe fglrx; dmesg | tail -n 50

    • #28294

      modprobe: ERROR: could not insert ‘fglrx’: No such device

      [ 13.002309] lp0: using parport0 (interrupt-driven).

      [ 13.005074] r8712u: Boot from EFUSE: Autoload OK

      [ 13.059888] ppdev: user-space parallel port driver

      [ 13.114389] microcode: AMD CPU family 0x6 not supported

      [ 13.202113] psmouse serio1: hgpk: ID: 10 00 64

      [ 13.490762] r8712u: CustomerID = 0x0000

      [ 13.490772] r8712u: MAC Address from efuse = 5c:d9:98:a7:2a:b5

      [ 13.490777] r8712u: Loading firmware from “rtlwifi/rtl8712u.bin”

      [ 13.492184] usbcore: registered new interface driver r8712u

      [ 13.725771] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

      [ 13.725781] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

      [ 13.725989] snd_via82xx 0000:00:11.5: setting latency timer to 64

      [ 14.055149] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5

      [ 14.425763] NET: Registered protocol family 10

      [ 14.468914] NET: Registered protocol family 4

      [ 14.477605] NET: Registered protocol family 5

      [ 15.691101] EXT4-fs (sda1): re-mounted. Opts: (null)

      [ 18.415873] Adding 5156860k swap on /dev/sda2. Priority:1 extents:1 across:5156860k

      [ 22.125711] wmi: Mapper loaded

      [ 41.646067] fuse init (API version 7.18)

      [ 41.780264] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 41.880061] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 42.094587] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 46.035908] r8169 0000:00:09.0: eth0: link down

      [ 46.039119] r8169 0000:00:09.0: eth0: link down

      [ 46.039647] ADDRCONF(NETDEV_UP): eth0: link is not ready

      [ 46.318084] Bluetooth: Core ver 2.16

      [ 46.318158] NET: Registered protocol family 31

      [ 46.318163] Bluetooth: HCI device and connection manager initialized

      [ 46.318169] Bluetooth: HCI socket layer initialized

      [ 46.318173] Bluetooth: L2CAP socket layer initialized

      [ 46.318184] Bluetooth: SCO socket layer initialized

      [ 46.351992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 46.355005] Bluetooth: BNEP filters: protocol multicast

      [ 46.744543] r8712u: 1 RCR=0x153f00e

      [ 46.745547] r8712u: 2 RCR=0x553f00e

      [ 46.852662] ADDRCONF(NETDEV_UP): wlan0: link is not ready

      [ 46.877727] ADDRCONF(NETDEV_UP): eth1: link is not ready

      [ 68.416544] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

      [ 69.032501] r8712u: [r8712_got_addbareq_event_callback] mac = 34:08:04:32:c8:b8, seq = 16, tid = 0

      [ 79.650018] wlan0: no IPv6 routers present

      [ 200.800393] r8712u: [r8712_got_addbareq_event_callback] mac = 34:08:04:32:c8:b8, seq = 22704, tid = 0

      [ 465.996817] fglrx: module license ‘Proprietary. (C) 2002 – ATI Technologies, Starnberg, GERMANY’ taints kernel.

      [ 465.996829] Disabling lock debugging due to kernel taint

      [ 466.042400] [fglrx] Maximum main memory to use for locked dma buffers: 1409 MBytes.

      [ 466.042885] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found

      [ 466.042892] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed

      [ 507.605406] [fglrx] Maximum main memory to use for locked dma buffers: 1409 MBytes.

      [ 507.605897] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found

      [ 507.605904] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed

      ho copiato quello che mi da dopo “sudo dkms status” :

      [ermanno@kermitilrospo ~]$ sudo dkms status

      [ermanno@kermitilrospo ~]$

    • #28295
      Silvan
      Amministratore del forum

      Cosa succede se dai il seguente comando:

      sudo dkms install -m ati-driver -v 13.12

      ?

    • #28296

      questo:

      Error! Could not locate dkms.conf file.

      File: /usr/src/ati-driver-13.12/dkms.conf does not exist.

    • #28297
      Silvan
      Amministratore del forum

      E’ installato il pacchetto xorg-drv-video-fglrx?

    • #28298

      SI

      attenzione: xorg-drv-video-fglrx-3:12.10-2mamba@i586 è già installato

    • #28299
      gigi
      Membro

      non so se c’entra ma guardate qua

      http://www.wildfiregames.com/forum/index.php?showtopic=16734

      praticamente l’accelerazione hardware è stata pian piano rimossa per vecchie schede da mesa > 7;

      nel mio caso che ho una S3 savage, devo fermarmi all 8.

      l’alternativa è no accelerazione o llvmpipe (un driver software che funziona male sulla mia savage) o bloccarsi a vecchie versioni di mesa (comunque con diversi limiti).

      Se non c’entra meglio per te!

      ciao e auguri

    • #28300
      gianka
      Partecipante

      ciao,

      sudo modprobe fglrx; dmesg | tail -n 50

      [ 12.147121] powernow-k8: 3 : pstate 3 (2000 MHz)

      [ 12.147123] powernow-k8: 4 : pstate 4 (1400 MHz)

      [ 12.241761] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6

      [ 12.241829] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7

      [ 12.241898] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8

      [ 12.241960] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9

      [ 12.242016] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10

      [ 12.245833] snd_hda_intel 0000:01:00.1: irq 42 for MSI/MSI-X

      [ 12.251719] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11

      [ 14.031596] input: ov519 as /devices/pci0000:00/0000:00:12.0/usb1/1-2/input/input12

      [ 14.039852] usbcore: registered new interface driver snd-usb-audio

      [ 14.039907] usbcore: registered new interface driver ov519

      [ 14.183100] NET: Registered protocol family 10

      [ 14.203012] NET: Registered protocol family 4

      [ 14.214014] NET: Registered protocol family 5

      [ 15.421314] EXT4-fs (sda1): re-mounted. Opts: (null)

      [ 15.630156] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

      [ 17.171788] [drm] Module unloaded

      [ 21.930028] mtrr: no MTRR for d0000000,10000000 found

      [ 23.103974] Adding 8191996k swap on /dev/sda2. Priority:1 extents:1 across:8191996k

      [ 39.461927] vboxdrv: Found 6 processor cores.

      [ 39.462151] vboxdrv: fAsync=0 offMin=0x77e offMax=0x1f97

      [ 39.462251] vboxdrv: TSC mode is ‘synchronous’, kernel timer mode is ‘normal’.

      [ 39.462253] vboxdrv: Successfully loaded version 4.2.0_openmamba (interface 0x001a0004).

      [ 39.472686] fuse init (API version 7.18)

      [ 39.821209] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 39.824216] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 39.828859] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 41.103776] eth0: setting full-duplex.

      [ 41.139012] Bluetooth: Core ver 2.16

      [ 41.139023] NET: Registered protocol family 31

      [ 41.139024] Bluetooth: HCI device and connection manager initialized

      [ 41.139026] Bluetooth: HCI socket layer initialized

      [ 41.139027] Bluetooth: L2CAP socket layer initialized

      [ 41.139030] Bluetooth: SCO socket layer initialized

      [ 41.148072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 41.148077] Bluetooth: BNEP filters: protocol multicast

      [ 45.408070] pci 0000:00:14.4: wake-up capability enabled by ACPI

      [ 47.052698] ata1.00: configured for UDMA/133

      [ 47.052704] ata1: EH complete

      [ 47.404532] EXT4-fs (sda1): re-mounted. Opts: commit=0

      [ 47.409714] EXT4-fs (sda3): re-mounted. Opts: commit=0

      [ 51.893248] eth0: no IPv6 routers present

      [ 234.905233] fglrx: module license ‘Proprietary. (C) 2002 – ATI Technologies, Starnberg, GERMANY’ taints kernel.

      [ 234.905240] Disabling lock debugging due to kernel taint

      [ 234.917509] [fglrx] Maximum main memory to use for locked dma buffers: 3136 MBytes.

      [ 234.917740] [fglrx] vendor: 1002 device: 68f9 count: 1

      [ 234.918282] [fglrx] ioport: bar 4, base 0xc000, size: 0x100

      [ 234.918622] [fglrx] Kernel PAT support is enabled

      [ 234.918636] [fglrx] module loaded – fglrx 13.25.5 [Dec 6 2013] with 1 minors

    • #28301
      gianka
      Partecipante

      succede questo

      sudo dkms install -m ati-driver -v 13.12

      Module ati-driver/13.12 already installed on kernel 3.4mamba/i586

    • #28302
      Silvan
      Amministratore del forum

      kermitilrospo: in questo post siamo sul kernel 3.10 e driver connessi che si trovano sul canale milestone2-kernel-next. Puoi abilitare il canale e fare l’aggiornamento di xorg-drv-video-fglrx (se vuoi installi anche il kernel 3.10 facendo un aggiornamento completo)

    • #28303
      Silvan
      Amministratore del forum

      gigi: qui siamo su Radeon HD5450 PCI-E e driver proprietari (no Mesa)

    • #28306

      aggiornamenti fatti:

      sudo dkms status:

      ati-driver, 13.12, 3.4mamba, i586: installed (original_module exists)

      ndiswrapper, 1.58: added

      +++++

      sudo modprobe flgrx; dmesg | tail -n 50:

      modprobe: FATAL: Module flgrx not found.

      [ 8.931465] usb 5-1: Product: 11n Adapter

      [ 8.931470] usb 5-1: Manufacturer: Manufacturer Realtek

      [ 8.931474] usb 5-1: SerialNumber: 00e04c000001

      [ 8.932166] r8712u: Staging version

      [ 8.932224] r8712u: register rtl8712_netdev_ops to netdev_ops

      [ 8.932233] usb 5-1: r8712u: USB_SPEED_HIGH with 4 endpoints

      [ 8.932937] usb 5-1: r8712u: Boot from EFUSE: Autoload OK

      [ 8.938231] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64

      [ 8.953527] psmouse serio1: hgpk: ID: 10 00 64

      [ 9.313529] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

      [ 9.313556] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

      [ 9.313774] snd_via82xx 0000:00:11.5: setting latency timer to 64

      [ 9.355058] usb 5-1: r8712u: CustomerID = 0x0000

      [ 9.355069] usb 5-1: r8712u: MAC Address from efuse = 5c:d9:98:a7:2a:b5

      [ 9.355075] usb 5-1: r8712u: Loading firmware from “rtlwifi/rtl8712u.bin”

      [ 9.801100] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5

      [ 10.505553] NET: Registered protocol family 10

      [ 10.597280] NET: Registered protocol family 4

      [ 10.625781] NET: Registered protocol family 5

      [ 12.394582] EXT4-fs (sda1): re-mounted. Opts: (null)

      [ 18.526588] [drm] VGACON disable radeon kernel modesetting.

      [ 18.526601] [drm:radeon_init] *ERROR* No UMS support in radeon module!

      [ 20.680836] mtrr: no MTRR for d8000000,8000000 found

      [ 22.325697] Adding 5156860k swap on /dev/sda2. Priority:1 extents:1 across:5156860k FS

      [ 24.829138] wmi: Mapper loaded

      [ 40.272150] [drm] VGACON disable radeon kernel modesetting.

      [ 40.272164] [drm:radeon_init] *ERROR* No UMS support in radeon module!

      [ 45.333069] fuse init (API version 7.22)

      [ 45.425098] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 45.553078] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 45.777745] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 48.500727] r8169 0000:00:09.0 eth1: link down

      [ 48.500742] r8169 0000:00:09.0 eth1: link down

      [ 48.500805] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

      [ 48.774113] Bluetooth: Core ver 2.16

      [ 48.774187] NET: Registered protocol family 31

      [ 48.774192] Bluetooth: HCI device and connection manager initialized

      [ 48.774216] Bluetooth: HCI socket layer initialized

      [ 48.774223] Bluetooth: L2CAP socket layer initialized

      [ 48.774236] Bluetooth: SCO socket layer initialized

      [ 48.804990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 48.804999] Bluetooth: BNEP filters: protocol multicast

      [ 48.808113] Bluetooth: BNEP socket layer initialized

      [ 49.208447] r8712u 5-1:1.0 wlan0: 1 RCR=0x153f00e

      [ 49.209390] r8712u 5-1:1.0 wlan0: 2 RCR=0x553f00e

      [ 49.316455] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

      [ 49.340791] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

      [ 70.501172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

      [ 71.270657] r8712u 5-1:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 34:08:04:32:c8:b8, seq = 16, tid = 0

      [ 75.264943] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

      per il momento non vedo video e suoni da youtube

    • #28307
      Silvan
      Amministratore del forum

      Ok per dkms, nel caricamento del modulo invece c’è un errore di digitazione del comando: flgrx -> fglrx

    • #28308

      chiedo scusa…….

      modprobe: FATAL: Module fglrx not found.

      [ 8.310814] psmouse serio1: hgpk: ID: 10 00 64

      [ 8.479365] lp0: using parport0 (interrupt-driven).

      [ 8.486945] ppdev: user-space parallel port driver

      [ 8.689357] usb 5-1: r8712u: CustomerID = 0x0000

      [ 8.689368] usb 5-1: r8712u: MAC Address from efuse = 5c:d9:98:a7:2a:b5

      [ 8.689374] usb 5-1: r8712u: Loading firmware from “rtlwifi/rtl8712u.bin”

      [ 8.793787] thermal LNXTHERM:00: registered as thermal_zone0

      [ 8.793796] ACPI: Thermal Zone [THRM] (40 C)

      [ 8.808351] tsc: Marking TSC unstable due to TSC halts in idle

      [ 8.809233] ACPI: acpi_idle registered with cpuidle

      [ 8.811053] Switching to clocksource acpi_pm

      [ 8.929388] ACPI: Fan [FAN] (on)

      [ 9.158639] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5

      [ 9.499180] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

      [ 9.499189] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

      [ 9.499405] snd_via82xx 0000:00:11.5: setting latency timer to 64

      [ 10.559831] NET: Registered protocol family 10

      [ 10.626147] NET: Registered protocol family 4

      [ 10.645670] NET: Registered protocol family 5

      [ 11.706687] EXT4-fs (sda1): re-mounted. Opts: (null)

      [ 17.863520] [drm] VGACON disable radeon kernel modesetting.

      [ 17.863532] [drm:radeon_init] *ERROR* No UMS support in radeon module!

      [ 20.026138] mtrr: no MTRR for d8000000,8000000 found

      [ 21.670970] Adding 5156860k swap on /dev/sda2. Priority:1 extents:1 across:5156860k FS

      [ 24.107816] wmi: Mapper loaded

      [ 39.660981] [drm] VGACON disable radeon kernel modesetting.

      [ 39.660995] [drm:radeon_init] *ERROR* No UMS support in radeon module!

      [ 44.748433] ip_tables: (C) 2000-2006 Netfilter Core Team

      [ 44.886250] fuse init (API version 7.22)

      [ 44.900065] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

      [ 45.147130] ip6_tables: (C) 2000-2006 Netfilter Core Team

      [ 48.188367] Bluetooth: Core ver 2.16

      [ 48.190086] NET: Registered protocol family 31

      [ 48.190097] Bluetooth: HCI device and connection manager initialized

      [ 48.190123] Bluetooth: HCI socket layer initialized

      [ 48.190130] Bluetooth: L2CAP socket layer initialized

      [ 48.190177] Bluetooth: SCO socket layer initialized

      [ 48.218065] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

      [ 48.218075] Bluetooth: BNEP filters: protocol multicast

      [ 48.218103] Bluetooth: BNEP socket layer initialized

      [ 48.278162] r8169 0000:00:09.0 eth0: link down

      [ 48.278178] r8169 0000:00:09.0 eth0: link down

      [ 48.278236] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

      [ 48.993577] r8712u 5-1:1.0 wlan0: 1 RCR=0x153f00e

      [ 48.994618] r8712u 5-1:1.0 wlan0: 2 RCR=0x553f00e

      [ 49.101315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

      [ 49.123194] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

      [ 70.548445] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

      [ 71.218286] r8712u 5-1:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 34:08:04:32:c8:b8, seq = 16, tid = 0

      [ 75.159521] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

    • #28309
      Silvan
      Amministratore del forum

      Bisogna capire perché il modulo è stato compilato e perché quando provi a caricarlo viene detto che non esiste. Un problema semplice di ricerca file ma che da trattare qua nel forum potrebbe diventare lungo. Comunque per cominciare che cosa restituisce questo:

      find /lib/modules/|grep fglrx

      ?

    • #28310

      find /lib/modules/|grep fglrx

      /lib/modules/3.4mamba/kernel/drivers/video/fglrx.ko

    • #28311
      Silvan
      Amministratore del forum

      Cosa esce con ls -l /lib/modules/3.4mamba/kernel/drivers/video/fglrx.ko ? Sospetto che sia un link simbolico.

      Comunque, scusa, ma rileggendo un altro post tu hai:

      01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)

      questo controller grafico non è più supportato dai driver proprietari per cui dovremmo tornare indietro al driver open e dovresti avviare con la prima voce di boot (modeset abilitato). Se è così proseguirei la discussione su questo problema nell’altro post per evitare confusione tra due problemi diversi.

    • #28312

      -rw-r–r– 1 root root 7823652 4 gen 21.16 /lib/modules/3.4mamba/kernel/drivers/video/fglrx.ko

      ora riavvio e cambio discussione 🙂

    • #28332
      michele_d
      Partecipante

      Ciao,

      dopo vari tentativi abbiamo deciso di buttare(buttare in senso figurartivo) la scheda ATI per sostituirla con un NVIDIA silent 210 visto che sul mio pc con o.m funziona alla perfezione.

      Adesso vorrei sapere i passi che devo compiere per fare funzionare anche su questa macchina la nuova scheda.

      Attentiamo notizie

      Grazie

      Mik/Gianka

    • #28335
      Silvan
      Amministratore del forum

      Ciao,

      qual è il problema riscontrato dopo la sostituzione della scheda? E con quali versioni di kernel e modalità di avvio (default o nomodeset) si verifica?

    • #28336
      gianka
      Partecipante

      ciao,

      dopo aver sostituito la scheda ho riscontrato questi problemi:

      con la modalità gnu/linux with linux 3.4 vedo bene i video youtube, le partite in streaming, i film in streaming, ma non mi funziona il gioco con wine non lo carica, facendo la videochiamata con skype gli altri mi vedono bene ma io vedo la mia immagine tutta nera.

      Con la modalità driver open sia con il kernel 3.4 che con il 3.10 dopo aver fatto l avvio il desktop è tutto nero.

      Grazie

    • #28337
      michele_d
      Partecipante

      Ciao,

      aggiungo che da un’assistenza remota ho controllato l’esistenza di questi pacchetti installati:

      xorg-drv-video-nvidia

      kernel-mamba-nongpl-nvidia

      libGL-nvidia-X11

      xorg-ext-libglx-nvidia

      xorg-apps-nvidia

      inoltre ho rinominato il file xorg.conf in xorg_old.conf e con utility nvidia ho rigenerato il file xorg.

      Magari questo può essere di aiuto.

      Mik

    • #28341
      gianka
      Partecipante

      ciao,

      ho scaricato dal sito NVIDIA il file NVIDIA-linux-x86-331.38.run e installato dopo di che è tornato a funzionare il gioco, vedo i video youtube a meraviglia con la modalità kernel 3.4.

      Gianka

    • #28343
      gianka
      Partecipante

      ciao,

      ho installato installer dal sito di NVIDIA.IL nome del file è NVIDIA-LINUX-X86-331.38.run.

      Sembra che sia tornato a funzionare tutto a meraviglia.Sto usando il kernel 3.10 vedo i video su youtube, skype funziona, il gioco funziona.

    • #28344
      gianka
      Partecipante
Visualizzazione 33 filoni di risposte
  • Devi aver eseguito l’accesso per poter rispondere a questa discussione.