Ciao a Tutti,
Ho recentemente installato la Milestone I e dopo esser riuscito ad inserirla nel menù di Grub, grazie al gentile aiuto ricevuto da Ercolinux e Silvan, mi sono scontrato con altri due problemi, ovvero:
- Audio: aprendo "KMix", la finestra è completamente chiara, ovvero non è presente niente per poter fare la configurazione. Ho provato a registrare con Audacity ed ovviamente, non registra niente.
- Video: aprendo "Cheese", la finestra presenta strisce colorate ed un riquadro con effetto neve (ID 041e:4036 Creative Technology, Ltd Webcam Live!).
Quanto sopra si riferisce alla Milestone I; ho provato anche la live della Milestone II ed ho riscontrato i medesimi problemi, con l' aggravante che non essendo presente il pacchetto "rp-pppoe", non posso connetermi (oltretutto, la live alle volte si avvia, alle volte no).
Mi piacerebbe sapere se è possibile metter a posto la "I" (dimenticavo, non funzionano nemmeno le quattro frecce per muovere il cursore); oppure, partendo dal presupposto che io riesca ad installare il pacchetto "rp-pppoe", se è meglio installare la "II" e su di essa lavorare per risolvere i problemi prima descritti.
Mi piacerebbe molto mantenere una distro Italiana sulla mia macchina e spero che i problemi descritti si possano risolvere; grazie per la vostra gentile attenzione. Ciao
Ciao, sicuramente conviene lavorare sulla 2 visto che è ormai prossima all'uscita definitiva.
rp-pppoe è già presente nella milestone-2 (sicuro che non sia installato cosa hai usato il cd o il DVD?), comunque per installarlo basta scaricarlo da qui il pacchetto: http://openmamba.org/download.html?file=/pub/openmamba/milestone2/RPMS.i586/rp-pppoe-3.10-1mamba.i586.rpm
Per la webcam in cheese vai nel menu modifica -> preferenze e verifica che sia selezionata la webcam come input.
Invece per quanto riguarda l'audio che modello di scheda hai?
Ciao Ercolinux,
Grazie per il tuo aiuto; ho seguito il tuo consiglio ed ho disinstallato la "I", installando la "II". Adesso ti racconto in che guai mi trovo 🙂
- Connessione Internet: hai ragione tu a proposito del pacchetto "rp-pppoe", esso è già presente con interfaccia grafica (quando me ne sono accorto, lo avevo già scaricato, comunque non l' ho installato), però almeno nel mio caso, creando la connessione, la stessa non si avvia.
Ho provato allora a seguire il sistema che conosco, cioè da terminale, ma la procedura non si avvia (pppoe-setup), perchè non è presente "ppp-2.3.10"; ho quindi scaricato il pacchetto (.tar.gz), ma non mi riesce d' installarlo, allego l' output.
Per quanto riguarda i problemi audio/video, "Cheese" funziona, ovvero sono riuscito a registrare un video, però è muto; anche "Audacity" non registra niente; ti allego due output che forse contengono dati che possono farti comodo, a proposito della scheda audio e della scheda madre.
Ancora grazie, ciao
Edit
Non capisco il motivo, ma gli allegati vengono rifiutati, copio quì i tre output del terminale.
Output fallita installazione pacchetto "ppp-2.3.10"
[dominum@Dominum---Tlokweng ~]$ cd /home/dominum/OpenMamba
[dominum@Dominum---Tlokweng OpenMamba]$ tar xf ppp-2.3.10.tar.gz
[dominum@Dominum---Tlokweng OpenMamba]$ cd /home/dominum /OpenMamba/ppp-2.3.10
[dominum@Dominum---Tlokweng ~]$ ./configure
bash: ./configure: No such file or directory
[dominum@Dominum---Tlokweng ~]$ ./configure
bash: ./configure: No such file or directory
[dominum@Dominum---Tlokweng ~]$ su
Password:
[root@Dominum---Tlokweng dominum]# su dominum
[dominum@Dominum---Tlokweng ~]$ cd /home/dominum /OpenMamba/ppp-2.3.10
[dominum@Dominum---Tlokweng ~]$ ./configure
bash: ./configure: No such file or directory
[dominum@Dominum---Tlokweng ~]$ su
Password:
[root@Dominum---Tlokweng dominum]# cd /home/dominum/OpenMamba/ppp-2.3.10
[root@Dominum---Tlokweng ppp-2.3.10]# ./configure
Creating links to Makefiles.
Makefile -> linux/Makefile.top
pppd/Makefile -> Makefile.linux
pppstats/Makefile -> Makefile.linux
chat/Makefile -> Makefile.linux
pppdump/Makefile -> Makefile.linux
[root@Dominum---Tlokweng ppp-2.3.10]# make
cd chat; make all
make[1]: Entering directory `/home/dominum/OpenMamba/ppp-2.3.10/chat'
cc -c -O2 -g -pipe -DTERMIOS -DSIGTYPE=void -UNO_SLEEP -DFNDELAY=O_NDELAY -o chat.o chat.c
make[1]: cc: Command not found
make[1]: [chat.o] Error 127
make[1]: Leaving directory `/home/dominum/OpenMamba/ppp-2.3.10/chat'
make: [all] Error 2
[root@Dominum---Tlokweng ppp-2.3.10]#
Dati scheda audio
dominum@Dominum---Tlokweng:~$ dmesg | grep -i hda
[ 8.476383] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.476417] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 8.476421] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 8.844987] hda_codec: num_steps = 0 for NID=0x1c (ctl = Front Playback Volume)
[ 8.845133] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.512106] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.514972] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.517686] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.520229] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.523404] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.527627] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.531202] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.533835] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.537750] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.541290] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.544734] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.548478] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.553422] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.558226] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.562292] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.564929] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.569780] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.573108] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.577018] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.580198] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.583891] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.587344] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.590723] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.594262] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.596968] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.603650] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.607119] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.609754] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.613463] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.617132] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.620785] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.624312] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.627718] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.630405] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.634341] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.637874] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.641961] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.650904] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.653691] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.657488] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
[ 9.660720] hda_codec: num_steps = 0 for NID=0x1d (ctl = Headphone Playback Volume)
dominum@Dominum---Tlokweng:~$ aplay -l
* Lista di PLAYBACK dispositivi hardware *
scheda 0: VT82xx [HDA VIA VT82xx], dispositivo 0: VT1708B Analog [VT1708B Analog]
Sottoperiferiche: 2/2
Sottoperiferica #0: subdevice #0
Sottoperiferica #1: subdevice #1
dominum@Dominum---Tlokweng:~$ cat /proc/asound/card*/codec* | grep -i codec
Codec: VIA VT1708B 8-Ch
dominum@Dominum---Tlokweng:~$
Dati Scheda Madre
dominum@Dominum---Tlokweng ~ $ sudo dmidecode
[sudo] password for dominum:
# dmidecode 2.9
SMBIOS 2.4 present.
30 structures occupying 940 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 02/24/2009
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: BIOSTAR Group
Product Name: P4M900-M7 FE
Version: Ver:1.0
Serial Number: OEM_Serial
UUID: 00000000-0000-0000-3412-000078563412
Wake-up Type: Power Switch
SKU Number:
Family:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: BIOSTAR Group
Product Name: P4M900-M7 FE
Version: Ver:1.0
Serial Number: OEM_Serial
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: BIOSTAR Group
Type: Desktop
Lock: Not Present
Version: P4M900-M7 FE
Serial Number: OEM_Serial
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 775
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 7A 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 10
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R)
Voltage: 1.2 V
External Clock: 200 MHz
Max Speed: 4000 MHz
Current Speed: 2500 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: Four-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Standard
EDO
Memory Module Voltage: 5.0 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0
Current Speed: 30 ns
Type: Other Unknown EDO
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: None
Current Speed: 30 ns
Type: Other Unknown EDO
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0012, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0015, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
n|US|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0016, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0017, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: DDR2
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0018, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: DDR2
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0019, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0016
Partition Width: 0
Handle 0x001A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0017
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: 1
Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0018
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: 1
Handle 0x001C, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
dominum@Dominum---Tlokweng ~ $
Ti consiglio di scaricare il pacchetto ppp dal repository di openmamba: http://www.openmamba.org/download.html?file=/pub/openmamba/milestone2/RPMS.i586/ppp-2.4.5-1mamba.i586.rpm
Per poter compilare un programma devi aver installato il gruppo di pacchetti relativi allo sviluppo (in questo caso ti manca almeno il compilatore cc).
Ciao Ercolinux,
Io non sono esperto ed adesso sono anche confuso 🙂 Deduco che i pacchetti .tar.gz non sono adatti per OpenMamba; ho scaricato il .rpm che mi hai gentilmente indicato, ma volendolo installare, ricevo la notifica che il pacchetto è già installato !?
Con un certo imbarazzo aggiungo che non capisco la nota a proposito della compilazione di un programma; a cosa ti riferisci, quale programma dovrei compilare ?
E per quanto riguarda il compilatore "cc", quale / da dove dovrei scaricare ? (Ho provato a fare delle ricerche, ma non ho capito quale posso usare su OpenMamba), e, per cosa lo dovrei usare ?
Mi rendo conto che l' incompetenza puo' dare fastidio, sto scrivendo per non piantare in asso la discussione, ma se per qualunque motivo il basso livello delle mie domande si dovesse rivelare fastidioso, lascia stare. Ciao
