Ciao
il file bootmisc.sh non esiste... devo crearlo piu che editarlo...?
$ sudo kate /etc/init.d/bootmisc.sh
sudo: parse error in /etc/sudoers near line -1
gil ~]$ postdrop: warning: unable to look up public/pickup: No such file or directory
gil ~]$ kate /etc/init.d/bootmisc.sh
dopo la mappatura con dmesg
$ dmesg
Linux version 2.6.24mamba (silvan@tao) (gcc version 4.2.2) #1 SMP PREEMPT Thu Apr 24 15:17:50 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5b80
Entering add_active_range(0, 0, 261872) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261872
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 261872
On node 0 totalpages: 261872
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 253 pages used for memmap
HighMem zone: 32243 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7760, 0024 (r2 HPQOEM)
ACPI: XSDT 3FEF30C0, 0054 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
ACPI: FACP 3FEFA3C0, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD 0)
ACPI: DSDT 3FEF3280, 70EB (r1 HPQOEM SLIC-CPC 1000 MSFT 3000000)
ACPI: FACS 3FEF0000, 0040
ACPI: SLIC 3FEFA5C0, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
ACPI: SSDT 3FEFA780, 0248 (r1 HPQOEM SLIC-CPC 1 LTP 1)
ACPI: HPET 3FEFAA40, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 98)
ACPI: MCFG 3FEFAAC0, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
ACPI: APIC 3FEFA500, 007C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfefff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827
Kernel command line: BOOT_IMAGE=(hd0,4)/boot/vmlinuz-2.6.24mamba root=/dev/sda4 ro resume2= video=uvesafb:1024x768-32,ywrap,mtrr:3 quiet splash=silent,fadein console=tty1
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2405.054 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031632k/1047488k available (2496k kernel code, 15188k reserved, 976k data, 348k init, 129984k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc046c000 - 0xc04c3000 ( 348 kB)
.data : 0xc037004d - 0xc0464444 ( 976 kB)
.text : 0xc0100000 - 0xc037004d (2496 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4813.05 BogoMIPS (lpj=2406529)
Security Framework initialized
Capability LSM initialized
Failure registering Root Plug module with the kernel
Failure registering Root Plug module with primary security module.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4809.90 BogoMIPS (lpj=2404954)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
Total of 2 processors activated (9622.96 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:01: iomem range 0x0-0x0 could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfefff0ff could not be reserved
system 00:0b: iomem range 0x3fef0000-0x3fefffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x3feeffff could not be reserved
system 00:0b: iomem range 0x0-0x0 could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: b000-bfff
MEM window: fda00000-fdafffff
PREFETCH window: fde00000-fdefffff
PCI: Bridge: 0000:00:04.0
IO window: 9000-9fff
MEM window: fdb00000-fdbfffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:10.0
IO window: a000-afff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1914k freed
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
scx200: NatSemi SCx200 Driver
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfefff000 is busy
Non-volatile memory driver v1.2
uvesafb: (C) 1988-2005, ATI Technologies Inc. RV51601.00, RV51601.00, 01.00, OEM: ATI ATOMBIOS(C) 1988-2005, ATI Technologies Inc. RV51601.00, VBE v3.0
uvesafb: protected mode interface info at c000:a196
uvesafb: pmi: set display start = c00ca224, set palette = c00ca2e6
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=4096
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
Console: switching to colour frame buffer device 128x48
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
fbcondecor: console 0 using theme 'default'
fbcondecor: switched decor state to 'on' on console 0
uvesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 16384k, total 16384k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
MM: desc_per_page = 128
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at PCI slot 0000:00:0d.0
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
ALSA device list:
No soundcards found.
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 348k freed
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 16
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 16
ata1: SATA link down (SStatus 0 SControl 310)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0f.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 17
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 17
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0414, max UDMA/33
ata3.00: applying bridge limits
ata3.00: configured for UDMA/33
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: ATA-7: ST3320820AS, 3.AHG, max UDMA/100
ata4.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0414 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320820AS 3.AH PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
rtc_cmos: probe of 00:05 failed with error -16
input: PC Speaker as /devices/platform/pcspkr/input/input3
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:14.0 to 64
ACPI: Thermal Zone [THRM] (40 C)
Linux video capture interface: v2.00
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
Linux agpgart interface v0.102
input: Power Button (FF) as /devices/virtual/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input5
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
wlan: svn r3367
ath_pci: svn r3367
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
[fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
saa7130/34: v4l2 driver version 0.2.14 loaded
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:10:be:1e
forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0b.1 -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 19, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:10.1 -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:10.1 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21
saa7133[0]: found at 0000:03:09.0, rev: 209, irq: 21, latency: 32, mmio: 0xfddfe000
saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected]
saa7133[0]: board init: gpio is 0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 1-8: new high speed USB device using ehci_hcd and address 2
saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-004b: chip found @ 0x96 (saa7133[0])
usb 1-8: configuration #1 chosen from 1 choice
tda8290 2-004b: setting tuner address to 61
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg4 type 0
tuner 2-004b: type set to tda8290+75a
scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg5 type 0
scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:3: [sdf] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg6 type 0
usb-storage: device scan complete
tda8290 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22
MadWifi: unable to attach hardware: 'Hardware self-test failed' (HAL status 14)
ACPI: PCI interrupt for device 0000:03:0a.0 disabled
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 17, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
fbcondecor: switched decor state to 'off' on console 0
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001116b71]
EXT3 FS on sda4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
Adding 2104504k swap on /dev/sda2. Priority:1 extents:1 across:2104504k
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 23
[fglrx] Reserve Block - 0 offset = 0X1fffb000 length = 0X5000
[fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[fglrx] Reserve Block - 2 offset = 0Xffc0000 length = 0X40000
[fglrx] interrupt source 20008000 successfully enabled
[fglrx] enable ID = 0x00000008
[fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000009
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
fusd: starting, $Revision: 1.97-kor-hacked-11 $, $Date: 2003/07/11 22:29:39 $, debuglevel=2
cdev control id: 261095424
fusd: registration successful
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
DROPPED IN=eth0 OUT= MAC= SRC="xxxxxx" DST=xxxxxx LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=1296 SEQ=0
eth0: no IPv6 routers present
DROPPED IN=eth0 OUT= MAC= SRC="xxxxxx" DST=xxxxx LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=57108 SEQ=0
DROPPED IN=eth0 OUT= MAC=xxxx SRC="xxxx" DST=xxxx LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=506 DF PROTO=TCP SPT=1075 DPT=54281 SEQ=1995518856 ACK=0 WINDOW=60984 RES=0x00 SYN URGP=0 OPT (020405AC01010402)
DROPPED IN=eth0 OUT= MAC=xxx SRC="62.241.93.161" DST=192.168.1.5 LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=634 DF PROTO=TCP SPT=1075 DPT=54281 SEQ=1995518856 ACK=0 WINDOW=60984 RES=0x00 SYN URGP=0 OPT (020405AC01010402)
DROPPED IN=eth0 OUT= MAC=xxx SRC="xxxxx" DST=xxxxx LEN=48 TOS=0x00 PREC=0x00 TTL=111 ID=1112 DF PROTO=TCP SPT=1075 DPT=54281 SEQ=1995518856 ACK=0 WINDOW=60984 RES=0x00 SYN URGP=0 OPT (020405AC01010402)
DROPPED IN=eth0 OUT= MAC=xxxxxx SRC="xxxx" DST=xxxx LEN=52 TOS=0x00 PREC=0x00 TTL=52 ID=65260 DF PROTO=TCP SPT=4658 DPT=54281 SEQ=654501494 ACK=0 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B40103030001010402)
DROPPED IN=eth0 OUT= MAC=xxxxx SRC="xxxx" DST=xxxxx LEN=52 TOS=0x00 PREC=0x00 TTL=52 ID=65456 DF PROTO=TCP SPT=4658 DPT=54281 SEQ=654501494 ACK=0 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B40103030001010402)
DROPPED IN=eth0 OUT= MAC=xxxx SRC="xxxxx" DST=xxxxx LEN=52 TOS=0x00 PREC=0x00 TTL=52 ID=323 DF PROTO=TCP SPT=4658 DPT=54281 SEQ=654501494 ACK=0 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B40103030001010402)
DROPPED IN=eth0 OUT= MAC= SRC="xxxx" DST=xxxxx LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=39964 SEQ=0
gil ~]$
@ gil :
Fermo! Fermo!
La cartella init.d ed il file bootmisc.sh esiste per forza, può darsi che non si trovi in /etc .
Quindi se hai creato da zero /etc/init.d/bootmisc.sh toglilo! Cerca dove si trova questo file bootmisc.sh che è contenuto in una cartella init.d od init e sicuramente non nella /home.
Adesso non sono su Openmamba quindi non posso esserti d'aiuto, cercalo e fammi sapere dove si trova.
Ciao
non ho ancora fatto nulla
pero /etc/init.d esiste mentre bootmisc.sh mi metto a cercarlo adesso...
bootmisc.sh ... non esiste... ############################################################o
mentre /etc/rc.d/init.d
ciao
In openmamba il file che fa la funzione di questo bootmisc.sh, se ho capito bene, è /etc/init.d/rc.local
